A true original.
As the first company to provide a sustainable plywood product harvested from eucalyptus and pine trees, Weyerhaeuser offers four proprietary grades of eucalyptus-face Lumin™ panels, including TRP and OVERLAY, plus three standard grades—all with high-quality aesthetics and excellent performance.
Eucalyptus TRP
12mm (15/32"), 15mm (19/32"), 18mm (23/32")
FACE
120 grit sanded with up to12 wood patches, minimal synthetic patching and up to 4 repaired splits not more than 15mm wide by 600mm long*
BACK
100 grit sanded allowing unlimited wood and synthetic patching
Best Face Appearance
Minimum Face Appearance
Back
Eucalyptus OVERLAY
12mm (15/32"), 15mm (19/32"), 18mm (23/32")
FACE
120 grit sanded with up to12 wood patches, minimal synthetic patching and up to 4 repaired splits not more than 15mm wide by 600mm long*
BACK
50 grit sanded allowing limited open defects and knot holes up to 38mm (1.5")
Best Face Appearance
Minimum Face Appearance
Back
Eucalyptus CCX-PTS
12mm (15/32"), 15mm (19/32"), 18mm (23/32")
FACE
100 grit sanded allowing unlimited wood and synthetic patching and an unlimited number of repaired splits*
BACK
50 grit sanded allowing unlimited open defects and knotholes up to 38mm (1.5") and open splits up to 25mm wide of unlimited length*
Best Face Appearance
Minimum Face Appearance
Back
Eucalyptus CDX
12mm (15/32"), 15mm (19/32"), 18mm (23/32")
FACE
Unsanded with open defects and knotholes up to 38mm (1.5") and open splits
BACK
Unsanded with open defects and knotholes up to 75mm (3") and open splits
Best Face Appearance
Minimum Face Appearance
Back
Eucalyptus FURN-I-FRAME
12mm (15/32"), 15mm (19/32"), 18mm (23/32"), 22mm (7/8")
FACE
Uncomposed faces are unsanded with open defects and knotholes up to 38mm (1.5") and open splits up to 9mm wide and 300mm long. The face grade also requires scattered knots defined such that within a critical (weakest) section there can be no more than 200mm of solid knots and 150mm of open knots.
BACK
Uncomposed faces are unsanded with open defects and knotholes up to 38mm (1.5") and open splits up to 9mm wide and 300mm long. The face grade also requires scattered knots defined such that within a critical (weakest) section there can be no more than 200mm of solid knots and 150mm of open knots.
Best Face Appearance
Minimum Face Appearance
Back
*Splits are defects that occur at the end of the panel running parallel to the grain and vary in acceptable width and length by grade.
© 2009 Weyerhaeuser. All Rights Reserved. Legal Notices.
